dmesg - AMD Radeon HD 6310
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a79b6fff] usable
BIOS-e820: [mem 0x00000000a79b7000-0x00000000a79fefff] ACPI NVS
BIOS-e820: [mem 0x00000000a79ff000-0x00000000a7a08fff] ACPI data
BIOS-e820: [mem 0x00000000a7a09000-0x00000000a7a65fff] reserved
BIOS-e820: [mem 0x00000000a7a66000-0x00000000a7a68fff] ACPI NVS
BIOS-e820: [mem 0x00000000a7a69000-0x00000000a7a6afff] usable
BIOS-e820: [mem 0x00000000a7a6b000-0x00000000a7a6bfff] reserved
BIOS-e820: [mem 0x00000000a7a6c000-0x00000000a7a6cfff] ACPI NVS
BIOS-e820: [mem 0x00000000a7a6d000-0x00000000a7aa3fff] reserved
BIOS-e820: [mem 0x00000000a7aa4000-0x00000000a7aaafff] ACPI NVS
BIOS-e820: [mem 0x00000000a7aab000-0x00000000a7ad1fff] reserved
BIOS-e820: [mem 0x00000000a7ad2000-0x00000000a7b14fff] ACPI NVS
BIOS-e820: [mem 0x00000000a7b15000-0x00000000a7d91fff] usable
BIOS-e820: [mem 0x00000000a7d92000-0x00000000a7ef6fff] reserved
BIOS-e820: [mem 0x00000000a7ef7000-0x00000000a7efffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Foxconn AMD HDZS01 /AHD1S/AHD1S-K/AHD1S-V, BIOS A93F1P04 08/14/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0A7F00000 mask FFFF00000 uncachable
2 base 0A8000000 mask FF8000000 uncachable
3 base 0B0000000 mask FF0000000 uncachable
4 base 0C0000000 mask FC0000000 uncachable
5 disabled
6 disabled
7 disabled
TOM2: 0000000140000000 aka 5120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 2687MB, range: 1MB, type UC
reg 2, base: 2688MB, range: 128MB, type UC
reg 3, base: 2816MB, range: 256MB, type UC
reg 4, base: 3GB, range: 1GB, type UC
total RAM covered: 2687M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2687MB, range: 1MB, type UC
e820: update [mem 0xa7f00000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf] mapped at [c00fcdc0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x36336000-0x37192fff]
ACPI: RSDP 000f0450 00024 (v02 ALASKA)
ACPI: XSDT a79ff068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP a7a06a70 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT a79ff150 0791A (v02 ALASKA A M I 00000001 INTL 20051117)
ACPI: FACS a7aa5f80 00040
ACPI: APIC a7a06b68 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG a7a06bd0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET a7a06c10 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT a7a06c48 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT a7a07028 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
4228MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xa79b6fff]
node 0: [mem 0xa7a69000-0xa7a6afff]
node 0: [mem 0xa7b15000-0xa7d91fff]
node 0: [mem 0xa7ef7000-0xa7efffff]
node 0: [mem 0x00001000-0x3fffffff]
On node 0 totalpages: 949195
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f3b36200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 8457 pages used for memmap
HighMem zone: 712503 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xa7f00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bce000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 938954
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 10485632 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00140000)
Memory: 3719272k/5242880k available (5956k kernel code, 77508k reserved, 2928k data, 756k init, 2883840k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f7408000 soft=f740a000
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1600.031 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.06 BogoMIPS (lpj=6400124)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD E-350 Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f74c2000 soft=f74c4000
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (6400.12 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa79b7000-0xa79fefff] (294912 bytes)
PM: Registering ACPI NVS region [mem 0xa7a66000-0xa7a68fff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xa7a6c000-0xa7a6cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xa7aa4000-0xa7aaafff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xa7ad2000-0xa7b14fff] (274432 bytes)
dummy:
RTC time: 16:50:57, date: 03/26/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: >host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xc0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: >root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: >[1022:1510] type 00 class 0x060000
pci 0000:00:01.0: >[1002:9802] type 00 class 0x030000
pci 0000:00:01.0: >reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: >reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: >reg 18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: >supports D1 D2
pci 0000:00:01.1: >[1002:1314] type 00 class 0x040300
pci 0000:00:01.1: >reg 10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: >supports D1 D2
pci 0000:00:04.0: >[1022:1512] type 01 class 0x060400
pci 0000:00:04.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4391] type 00 class 0x010601
pci 0000:00:11.0: >reg 10: [io 0xf190-0xf197]
pci 0000:00:11.0: >reg 14: [io 0xf180-0xf183]
pci 0000:00:11.0: >reg 18: [io 0xf170-0xf177]
pci 0000:00:11.0: >reg 1c: [io 0xf160-0xf163]
pci 0000:00:11.0: >reg 20: [io 0xf150-0xf15f]
pci 0000:00:11.0: >reg 24: [mem 0xfeb4f000-0xfeb4f3ff]
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io 0xf140-0xf147]
pci 0000:00:14.1: >reg 14: [io 0xf130-0xf133]
pci 0000:00:14.1: >reg 18: [io 0xf120-0xf127]
pci 0000:00:14.1: >reg 1c: [io 0xf110-0xf113]
pci 0000:00:14.1: >reg 20: [io 0xf100-0xf10f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: >reg 10: [mem 0xfeb4a000-0xfeb4afff]
pci 0000:00:15.0: >[1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: >supports D1 D2
pci 0000:00:16.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: >reg 10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:16.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: >reg 10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:16.2: >supports D1 D2
pci 0000:00:16.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: >[1022:1700] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1701] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1702] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1703] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1704] type 00 class 0x060000
pci 0000:00:18.5: >[1022:1718] type 00 class 0x060000
pci 0000:00:18.6: >[1022:1716] type 00 class 0x060000
pci 0000:00:18.7: >[1022:1719] type 00 class 0x060000
pci 0000:00:04.0: >PCI bridge to [bus 01-01]
pci 0000:00:14.4: >PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: >reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:03:00.0: >reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: >PCI bridge to [bus 03-05]
pci 0000:00:15.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: > bridge window [mem 0xfe100000-0xfeafffff]
pci 0000:00:15.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xa79b7000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7a6b000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7d92000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7f00000-0xa7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x03af window]
pnp 00:00: >[io 0x03e0-0x0cf7 window]
pnp 00:00: >[io 0x03b0-0x03df window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xc0000000-0xffffffff window]
pnp 00:00: >[mem 0x00000000 window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xe0000000-0xefffffff]
system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x040b]
pnp 00:02: >[io 0x04d6]
pnp 00:02: >[io 0x0c00-0x0c01]
pnp 00:02: >[io 0x0c14]
pnp 00:02: >[io 0x0c50-0x0c51]
pnp 00:02: >[io 0x0c52]
pnp 00:02: >[io 0x0c6c]
pnp 00:02: >[io 0x0c6f]
pnp 00:02: >[io 0x0550-0x0551]
pnp 00:02: >[io 0x0cd0-0x0cd1]
pnp 00:02: >[io 0x0cd2-0x0cd3]
pnp 00:02: >[io 0x0cd4-0x0cd5]
pnp 00:02: >[io 0x0cd6-0x0cd7]
pnp 00:02: >[io 0x0cd8-0x0cdf]
pnp 00:02: >[io 0x0800-0x089f]
pnp 00:02: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0b20-0x0b3f]
pnp 00:02: >[io 0x0900-0x090f]
pnp 00:02: >[io 0x0910-0x091f]
pnp 00:02: >[io 0xfe00-0xfefe]
pnp 00:02: >[io 0x0060-0x005f disabled]
pnp 00:02: >[io 0x0064-0x0063 disabled]
pnp 00:02: >[mem 0xfec00000-0xfec00fff]
pnp 00:02: >[mem 0xfee00000-0xfee00fff]
pnp 00:02: >[mem 0xfed80000-0xfed8ffff]
pnp 00:02: >[mem 0xfed61000-0xfed70fff]
pnp 00:02: >[mem 0xfed40000-0xfed44fff]
pnp 00:02: >[mem 0xfec10000-0xfec10fff]
pnp 00:02: >[mem 0xfed00000-0xfed00fff]
pnp 00:02: >[mem 0xffe00000-0xffffffff]
system 00:02: >[io 0x040b] has been reserved
system 00:02: >[io 0x04d6] has been reserved
system 00:02: >[io 0x0c00-0x0c01] has been reserved
system 00:02: >[io 0x0c14] has been reserved
system 00:02: >[io 0x0c50-0x0c51] has been reserved
system 00:02: >[io 0x0c52] has been reserved
system 00:02: >[io 0x0c6c] has been reserved
system 00:02: >[io 0x0c6f] has been reserved
system 00:02: >[io 0x0550-0x0551] has been reserved
system 00:02: >[io 0x0cd0-0x0cd1] has been reserved
system 00:02: >[io 0x0cd2-0x0cd3] has been reserved
system 00:02: >[io 0x0cd4-0x0cd5] has been reserved
system 00:02: >[io 0x0cd6-0x0cd7] has been reserved
system 00:02: >[io 0x0cd8-0x0cdf] has been reserved
system 00:02: >[io 0x0800-0x089f] has been reserved
system 00:02: >[io 0x0b20-0x0b3f] has been reserved
system 00:02: >[io 0x0900-0x090f] has been reserved
system 00:02: >[io 0x0910-0x091f] has been reserved
system 00:02: >[io 0xfe00-0xfefe] has been reserved
system 00:02: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: >[mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: >[mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: >[mem 0xfed40000-0xfed44fff] has been reserved
system 00:02: >[mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: >[mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: >[mem 0xffe00000-0xffffffff] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: >[io 0x0a00-0x0a0f]
pnp 00:03: >[io 0x0000-0xffffffffffffffff disabled]
system 00:03: >[io 0x0a00-0x0a0f] has been reserved
system 00:03: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: >[io 0x0060]
pnp 00:04: >[io 0x0064]
pnp 00:04: >[irq 1]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: >[io 0x03f8-0x03ff]
pnp 00:05: >[irq 4]
pnp 00:05: >[dma 0 disabled]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: >[dma 4]
pnp 00:06: >[io 0x0000-0x000f]
pnp 00:06: >[io 0x0081-0x0083]
pnp 00:06: >[io 0x0087]
pnp 00:06: >[io 0x0089-0x008b]
pnp 00:06: >[io 0x008f]
pnp 00:06: >[io 0x00c0-0x00df]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: >[io 0x0070-0x0071]
pnp 00:07: >[irq 8]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: >[io 0x0061]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:09: >[io 0x0010-0x001f]
pnp 00:09: >[io 0x0022-0x003f]
pnp 00:09: >[io 0x0044-0x005f]
pnp 00:09: >[io 0x0072-0x007f]
pnp 00:09: >[io 0x0080]
pnp 00:09: >[io 0x0084-0x0086]
pnp 00:09: >[io 0x0088]
pnp 00:09: >[io 0x008c-0x008e]
pnp 00:09: >[io 0x0090-0x009f]
pnp 00:09: >[io 0x00a2-0x00bf]
pnp 00:09: >[io 0x00e0-0x00ef]
pnp 00:09: >[io 0x04d0-0x04d1]
system 00:09: >[io 0x04d0-0x04d1] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[io 0x00f0-0x00ff]
pnp 00:0a: >[irq 13]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0xa8000000-0xbfffffff]
system 00:0c: >[mem 0xa8000000-0xbfffffff] has been reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: >[mem 0xfed00000-0xfed003ff]
pnp 00:0d: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:04.0: >bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
pci 0000:00:04.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
pci 0000:00:04.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 01-01] add_size 200000
pci 0000:00:04.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:04.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:04.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:04.0: >BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:04.0: >BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:04.0: >BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:04.0: >PCI bridge to [bus 01-01]
pci 0000:00:04.0: > bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: > bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:04.0: > bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:14.4: >PCI bridge to [bus 02-02]
pci 0000:00:15.0: >PCI bridge to [bus 03-05]
pci 0000:00:15.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: > bridge window [mem 0xfe100000-0xfeafffff]
pci 0000:00:15.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:00: >resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: >resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: >resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: >resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: >resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: >resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:01: >resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:02: >resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: >resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: >resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: >resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: >resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: >resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: >resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:03: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: >resource 1 [mem 0xfe100000-0xfeafffff]
pci_bus 0000:03: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: >Boot video device
PCI: CLS 64 bytes, default 64
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1364316656.600:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1631
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
ACPI: Sleep Button [SLPF]
ACPI Error: Could not enable SleepButton event (20120320/evxfevnt-200)
ACPI Warning: Could not enable fixed event 0x3 (20120320/evxface-636)
Freeing initrd memory: 14708k freed
button: probe of LNXSLPBN:00 failed with error -22
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [THRM] (45 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb4f000 port 0xfeb4f280 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfeb4d000
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >5 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 17, io mem 0xfeb4b000
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >5 ports detected
ehci_hcd 0000:00:16.2: >EHCI Host Controller
ehci_hcd 0000:00:16.2: >new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: >debug port 1
ehci_hcd 0000:00:16.2: >irq 17, io mem 0xfeb48000
ehci_hcd 0000:00:16.2: >USB 2.0 started, EHCI 1.00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: EHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb3: >SerialNumber: 0000:00:16.2
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: >irq 18, io mem 0xfeb4e000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:12.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >5 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: >irq 18, io mem 0xfeb4c000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.0
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >5 ports detected
ohci_hcd 0000:00:14.5: >OHCI Host Controller
ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfeb4a000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:14.5
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
ohci_hcd 0000:00:16.0: >OHCI Host Controller
ohci_hcd 0000:00:16.0: >new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: >irq 18, io mem 0xfeb49000
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: OHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb7: >SerialNumber: 0000:00:16.0
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: >RTC can wake from S4
rtc_cmos 00:07: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:420:844
rtc_cmos 00:07: >setting system clock to 2013-03-26 16:50:57 UTC (1364316657)
powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (1600 MHz)
powernow-k8: 1 : pstate 1 (1280 MHz)
powernow-k8: 2 : pstate 2 (800 MHz)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-5: >new high-speed USB device number 2 using ehci_hcd
isapnp: No Plug & Play device found
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-5: >New USB device found, idVendor=058f, idProduct=6254
usb 1-5: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: >USB hub found
hub 1-5:1.0: >4 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Corsair Nova 2 SSD, 5.02, max UDMA/133
ata2.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: >Direct-Access ATA Corsair Nova 2 S 5.02 PQ: 0 ANSI: 5
sd 1:0:0:0: >Attached scsi generic sg0 type 0
sd 1:0:0:0: >[sda] 58626288 512-byte logical blocks: (30.0 GB/27.9 GiB)
sd 1:0:0:0: >[sda] Write Protect is off
sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[96]: starting version 175
usb 2-3: >new high-speed USB device number 3 using ehci_hcd
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: >irq 40 for MSI/MSI-X
r8169 0000:03:00.0: >eth0: RTL8168e/8111e at 0xf8414000, d0:27:88:65:21:6b, XID 0c200000 IRQ 40
r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 2-3: >New USB device found, idVendor=0cf3, idProduct=9271
usb 2-3: >New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 2-3: >Product: USB2.0 WLAN
usb 2-3: >Manufacturer: ATHEROS
usb 2-3: >SerialNumber: 12345
Refined TSC clocksource calibration: 1599.999 MHz.
Switching to clocksource tsc
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 5-1: >new full-speed USB device number 2 using ohci_hcd
usb 5-1: >New USB device found, idVendor=00cd, idProduct=00ae
usb 5-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: >Product: SubSession Traveller 5
usb 5-1: >Manufacturer: TerraTec Electronic GmbH
Adding 3794940k swap on /dev/sda5. Priority:-1 extents:1 across:3794940k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[341]: starting version 175
lp: driver loaded but no devices found
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
usb 1-5.2: >new full-speed USB device number 3 using ehci_hcd
[fglrx] Maximum main memory to use for locked dma buffers: 3490 MBytes.
[fglrx] vendor: 1002 device: 9802 count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:20: >registered as cooling_device2
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
snd_hda_intel 0000:00:01.1: >irq 41 for MSI/MSI-X
usb 1-5.2: >New USB device found, idVendor=046d, idProduct=c52f
usb 1-5.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: >Product: USB Receiver
usb 1-5.2: >Manufacturer: Logitech
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usb 1-5.4: >new low-speed USB device number 4 using ehci_hcd
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
usb 1-5.4: >New USB device found, idVendor=04d9, idProduct=a088
usb 1-5.4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xbafe00 already in use
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 [PCSPP,EPP]
parport0: irq 0 detected
cfg80211: Calling CRDA to update world regulatory domain
usb 2-3: >ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
lp0: using parport0 (polling).
microcode: CPU0: patch_level=0x05000028
init: failsafe main process (603) killed by TERM signal
hid-generic 0003:00CD:00AE.0001: >unbalanced collection at end of report description
hid-generic: probe of 0003:00CD:00AE.0001 failed with error -22
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.0/input/input10
hid-generic 0003:046D:C52F.0002: >input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/input/input11
hid-generic 0003:046D:C52F.0003: >input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input1
input: HID 04d9:a088 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.0/input/input12
hid-generic 0003:04D9:A088.0004: >input,hidraw2: USB HID v1.11 Keyboard [HID 04d9:a088] on usb-0000:00:12.2-5.4/input0
input: HID 04d9:a088 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.1/input/input13
hid-generic 0003:04D9:A088.0005: >input,hidraw3: USB HID v1.11 Mouse [HID 04d9:a088] on usb-0000:00:12.2-5.4/input1
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x05000028
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
r8169 0000:03:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
usb 2-3: >ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
vesafb: mode is 1600x1200x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8e80000, using 7552k, total 7552k
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
ath9k_htc 2-3:1.0: >ath9k_htc: HTC initialized with 33 credits
ath9k_htc 2-3:1.0: >ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: >Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
Registered led device: ath9k_htc-phy0
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-stop pre-start process (1246) terminated with status 1
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
fglrx_pci 0000:00:01.0: >irq 42 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1250
[fglrx] Firegl kernel thread PID: 1251
[fglrx] Firegl kernel thread PID: 1252
[fglrx] IRQ 42 Enabled
[fglrx] Gart USWC size:1140 M.
[fglrx] Gart cacheable size:451 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc6c000, size:394000
[fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[fglrx] ATIF platform detected with notification ID: 0x81
wlan0: authenticate with 00:15:6d:84:40:ff
wlan0: send auth to 00:15:6d:84:40:ff (try 1/3)
wlan0: authenticated
wlan0: associate with 00:15:6d:84:40:ff (try 1/3)
wlan0: RX AssocResp from 00:15:6d:84:40:ff (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0